Abacus Lighting

Benefits


  • Wireless control simplifies operation
  • Centrally monitor and adjust power consumption
  • Dimmable in accordance with EN12193
  • Enables efficient planning of maintenance
  • No re-lamping costs
AAA-LUX AL360 LED

AAA-LUX AL360 LED

AL360



IP65

Polar intensity diagrams

AAA-LUX AL360-45 Polar intesity diagram
AL360-45
Luminaire: AAA-LUX AL360-45 V6.0
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX - AL360-50 Polar intesity diagram
AL360-50
Luminaire: AAA-LUX AL360-50 V6.0
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX - AL360-55 Polar intesity diagram
AL360-55
Luminaire: AAA-LUX AL-360-55 V6.0
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX - AL360-60 Polar intesity diagram
AL360-60
Luminaire: AAA-LUX AL360-60 V6.0
Lamps: 1 x 8 LED SOURCES AAA-LUX


On this page: Dimensions | Lamp data

Additional AAA-LUX AL360 LED benefits


  • Instant startup
    • Light can be switched on and off as and when required, thus saving energy costs by reducing power consumption from wasted light.
  • Flexible dimming
    • Dimmable down to 10% for low use and security giving massive energy savings over conventional HID lamps.
  • Highly efficient optics
    • Increased system efficiency by reducing wasted light.

Technical Features


  • Controllable via smart devices, touch screen or wireless switch box
  • Mounting height 12-25m
  • Mounted and pre-aimed onto a 360° bracket
  • Die cast aluminium polyester powder coated body with integrated heat sink
  • Lenses installed behind flat glass for maximum integrity of the lenses
  • Body and driver compartment sealed to IP65
  • High powered 1.5kW luminaire

Applications


  • Large area lighting
  • Retail and leisure car parks

Colours


Black Black

Lighting Distribution


  • The AAA-LUX AL-series of LED Luminaires offers a variety of distribution options to suit individual requirements (360°, 60°, 90° and 180°)

Dimensions (mm)


AAA-LUX - AL360 - Top viewAL360 top view
AAA-LUX - AL360 - Side viewAL360 side view
AAA-LUX - AL360

 
AAA-LUX LED Floodlighting
 

AAA-LUX light management system


The system can be remotely monitored from a central location via computer. Wireless push button boxes or proximity sensors at entry gates can send information to the control box to activate the lights or alternatively smart devices can be used to give the same control. These signals are fed into the system and will activate the desired pre-programmed lighting scenes. In case of emergency, all lights can be switched to maximum at the central console. The facility manager can analyse the energy consumption of the system, and optimize between lighting level and energy costs. With a remote access module, an installer can access the system and inspect the luminaires and light management system. Based on luminaire data, maintenance can be scheduled.

AAA-LUX light management system

Easy replacement


  • Direct 400VAC connection
  • Wireless control
  • No complicated bracketry required

Electrically the luminaire will be connected to existing 400 VAC electrical installations. Even the existing light switches can remain in place.

However, in case of new installation, cabling costs are significantly lower. First, the product has no in-rush of start-up current, resulting in a much simpler cabling lay-out and also, fuses can have a lower rating. Secondly, with the wireless control of the luminaires no extra control cabling is needed.

Energy saving - Total-cost-of-ownership


  • Dimmed to the right level
  • Switched on when needed
  • Short ROI

Conventional luminaires are based on Metal Halide (MH) or High Pressure Sodium (HPS) lamps. These sources have a start-up and cooling period and cannot be dimmed. Over lifetime these lamps suffer from significant lumen depreciation, which means that new installations over-illuminate the area every night by approximately 40%. Even areas with no activity, but camera surveillance only, are illuminated at full power with MH or HPS light sources.

With the AAA-LUX lighting management system luminaires are set at the requested illumination level. Areas with no human activities are dimmed to camera level, increasing energy savings above 70%. Beside this, the projected 15 year lifetime reduces lamp replacements costs as well. In many cases, our TCO model calculates breakeven times below 3 years.


  Lamp Watts & Power consumption
(0-90% dimming)		 Voltage output Max. current Power factor
(at max. power)		 Colour temp. Colour rendering (Ra) Weight (kg) Distribution (deg)
AL360 1500W (100%)
100W (10%)		 400Vac ≈4.5A >0.98 5200K >80 <25 45, 50, 55, 60

All dimensions are in mm.
Home
About Abacus
History and people
Recruitment
News
Facebook
Twitter
Applications
Airports
Ports
Amenity and architectural
Car park
Sport
Industrial and commercial
Road and rail
Products
Car park and amenity lighting
Architectural lighting
Road lighting
Industrial lighting
Floodlighting - Sports and area
Columns, base-hinged and fixed
High mast systems
Telescopic masts

Services
Design
Installation
Maintenance
Training
Bespoke structures
Fabrication services

Technical
Photometry
Brochure library

Media
News
Movies
Facebook
Twitter feed

Contact
Head office
Telephone
+44 (0)1623 511 111
Email
sales@abacuslighting.com