Abacus Lighting

Benefits


  • Wireless control simplifies operation
  • Centrally monitor and adjust power consumption
  • Dimmable in accordance with EN12193
  • Enables efficient planning of maintenance
  • No re-lamping costs
  • High uniformity capabilities
  • Built in in-rush protection
AAA-LUX WS Series LED

AAA-LUX WS Series LED

WS100 - WS400




IP65

Polar intensity diagrams

AAA-LUX WS100 V3.5 Polar intesity diagram
WS100
Luminaire: AAA-LUX WS100 V3.5
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX WS150 V3.5 Polar intesity diagram
WS150
Luminaire: AAA-LUX WS150 V3.5
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX WS200 V3.5 Polar intesity diagram
WS200
Luminaire: AAA-LUX WS200 V3.5
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX WS250 V3.5 Polar intesity diagram
WS250
Luminaire: AAA-LUX WS250 V3.5
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX WS301 V3.5 Polar intesity diagram
WS301
Luminaire: AAA-LUX WS301 V3.5
Lamps: 1 x 8 LED SOURCES AAA-LUX

AAA-LUX WS400 V3.8 Polar intesity diagram
WS400
Luminaire: AAA-LUX WS400 V3.8
Lamps: 1 x 4 LED SOURCES AAA-LUX


On this page: Dimensions | Lamp data

Additional AAA-LUX WS Series LED benefits


  • Instant startup
    • Light can be switched on and off as and when required, thus saving energy costs by reducing power consumption from wasted light.
  • Flexible dimming
    • Dimmable down to 10% for low use and security giving massive energy savings over conventional HID lamps.
  • Variable switching
    • Enables individual and part pitch lighting.
  • Highly efficient optics
    • Increased system efficiency by reducing wasted light.
  • Compatibility
    • No upgrade required to existing electrical and column installations in most cases.

Technical Features


  • Controllable via smart devices, touch screen or wireless switch box
  • Flexible bracket mount
  • Die cast aluminium polyester powder coated body with integrated heat sink
  • Lenses installed behind flat glass for maximum integrity of the lenses
  • Body and driver compartment sealed to IP65
  • High powered luminaire
       - 1.55kW luminaire (WS100 - WS301)
       - 0.775kW luminaire (WS400)

Applications


  • Sports Lighting

Colours


Black Black

Lighting Distribution


  • The AAA-LUX WS-series of LED Luminaires offers a variety of distribution options to suit individual requirements.

Dimensions (mm)


AAA-LUX - WS Series - Front viewWS Series front view
AAA-LUX - WS Series - Side viewWS Series - Side view
AAA-LUX - WS Series

 
AAA-LUX LED Floodlighting
 

AAA-LUX light management system


The system can be remotely monitored from a central location wirelessly or via a cabled computer. Lockable wireless push button boxes located at the pitch or in the control building can be used to send information to the control box to activate, dim or control the lights. In addition, smart devices can be used to give the same control. These signals are fed into the system and will activate the desired pre-programmed switching e.g. dimming of the lighting level or part pitch lighting. In case of emergency, all lights can be switched to maximum at the central console or via a push button box. The Facility Manager can analyse the energy consumption of the system and optimise for lighting level and energy costs. With a remote access module, an installer can access the system and inspect the luminaires and light management system. Based on luminaire data, maintenance can then be scheduled.

AAA-LUX light management system

Easy replacement


  • Direct 400VAC connection
  • Wireless control
  • No complicated bracketry required

Electrically the luminaire will be connected to existing 400 VAC electrical installations. Even the existing light switches can remain in place.

However, in the case of new installations, cabling costs are significantly lower. First, the product has no inrush of start-up current, resulting in a much simpler cabling layout and also, fuses can have a lower rating. Secondly, with the wireless control of the luminaires, no extra control cabling is needed.

Energy saving - Total-cost-of-ownership


  • Dimmed to the right level
  • Switched on when needed
  • Short ROI

Conventional luminaires are based on Metal Halide (MH) or High Pressure Sodium (HPS) lamps. These sources have a start-up and cooling period and cannot be dimmed. Over lifetime these lamps suffer from significant lumen depreciation, which means that new installations over-illuminate the area every night by approximately 40%. Even areas with no activity, but camera surveillance only, are illuminated at full power with MH or HPS light sources.

With the AAA-LUX lighting management system luminaires are set at the requested illumination level. Courts / pitches with no activities can be dimmed to orientation level or switched off, increasing energy savings above 70%. Beside this, the projected 25 year lifetime reduces lamp replacements costs as well. In many cases, our TCO model calculates breakeven times below 3 years.


  Lamp Watts & Power consumption
(0-90% dimming)
Voltage
output
Max.
current
Power factor
(at max. power)
Colour temp. Colour
rendering (Ra)
Weight
(kg)
Luminous efficacy
(lm/W)
WS100
WS150
WS200
WS250
WS300

1550W (100%) 200W (10%)

400Vac 4.5A >0.98 5200K >80 28 106 typical
WS400 775W (100%) 77.5W (10%) 400Vac 2.3A >0.98 5200K >80 19 106 typical

All dimensions are in mm.