Benefits
- The Challenger® 3 delivers an optically precise symmetrical beam specifically designed and suited to stadium floodlighting requirements
Challenger®3
AL5900
Key features
AL5911
Narrow beam
AL5912
Medium beam
AL5913
Wide beam
AL5914
MHN-SB Pro 2kW
Extra narrow beam
All dimensions are in mm.
On this page: Dimensions | Accessories | Lamp options
Technical Features
Dimensions
Mounting:
Stirrup mounted using M20 fixing
Stirrup adjustment +/- 140°
No baffle in extra narrow version
Weight: 15kg.
Front wind area: 0.196m² 70° max setting
- Body of high pressure die cast aluminium, finished in light grey (RAL7035), polyester powder coating
- Reflector system of high purity, polished and anodised aluminium. Incorporating an internal baffle to improve efficiency and reduce glare
- Toughened front glass, secured by cast aluminium front frame
- Galvanised steel stirrup, with additional elevation locking screws
- Electrical connection box (IP66) housing ignitor, located on side of stirrup, fitted with 2 x GORE™ membrane
- Designed to accept double ended, long arc 2kW or 1kW metal halide lamps
- Dual provision on the side of the floodlight body to attach the gun sight aiming device to allow accurate beam alignment (AL5931)
- Easy access for re-lamping via opening of the rear cover. Positive closure via large stainless steel catch
Dimensions
Mounting:
Stirrup mounted using M20 fixingStirrup adjustment +/- 140°
No baffle in extra narrow version
Weight: 15kg.Front wind area: 0.196m² 70° max setting
Maintenance
Easy Maintenance: Access to the lamp by means of opening the rear door Accessories
Single blade louvre - AL5922
This accessory for the Challenger® 2 & 3 minimises upward light while maintaining good vertical lighting levels on the playing field
Aiming tool kit - AL5931
Set of equipment and instructions to enable the Challenger® 2 & 3 to be aimed with pinpoint accuracy to a specific point on the design area. Allows the highest level of control over the aiming and commissioning part of a floodlighting project
Half concentric louvre - AL5921
This accessory for the Challenger® 3 provides the highest level of upward light and overspill control
Challenger® 3 with louvres
| Beam Type | Lamp: Manufacturer Product Code | Lamp Manufacturer | Lamp: Abacus Product Code | Lampholder Type | |
|---|---|---|---|---|---|
| AL5901 | Narrow | 2kW: HQI-TS 2000WDS | Osram | LPW2000M/D | K12s-7 cable |
| AL5902 | Medium | 2kW: HQI-TS 2000WDS | Osram | LPW2000M/D | K12s-7 cable |
| AL5903 | Wide | 2kW: HQI-TS 2000WDS | Osram | LPW2000M/D | K12s-7 cable |
| AL5904 | Narrow | 1kW: HQI-TS 1000WDS | Osram | LPW1000MB/L | K12s-7 cable |
| AL5905 | Medium | 1kW: HQI-TS 1000WDS | Osram | LPW1000MB/L | K12s-7 cable |
| AL5906 | Wide | 1kW: HQI-TS 1000WDS | Osram | LPW1000MB/L | K12s-7 cable |
| AL5907 | Narrow | MHN-SA 2KW 400V/956 | Philips | LPP2000MHN-SA | XW UNP |
| AL5908 | Medium | MHN-SA 2KW 400V/956 | Philips | LPP2000MHN-SA | XW UNP |
| AL5909 | Wide | MHN-SA 2KW 400V/956 | Philips | LPP2000MHN-SA | XW UNP |
| AL5910 | Extra Narrow | MHN-SA 2KW 400V/956 | Philips | LPP2000MHN-SA | XW UNP |
| AL5911 | Narrow | MHN-SB 2KW 400V/956 | Philips | LPP2000MHN-SB | K12s-7 WH UNP |
| AL5912 | Medium | MHN-SB 2KW 400V/956 | Philips | LPP2000MHN-SB | K12s-7 WH UNP |
| AL5913 | Wide | MHN-SB 2KW 400V/956 | Philips | LPP2000MHN-SB | K12s-7 WH UNP |
| AL5914 | Extra Narrow | MHN-SB 2KW 400V/956 | Philips | LPP2000MHN-SB | K12s-7 WH UNP |
Lamp references
| Lamp Manufacturer & Lamp Ref. |
Lamp Wattage | Colour Temp | RA | Lamp Lumen Output: (Initial lm) |
Lamp Current | Supply Voltage | Total Circuit Power |
|---|---|---|---|---|---|---|---|
| Philips | |||||||
| MHN-SB 2000W/956 | 2kW | 5600K | 90 | 200,000 I.lm | 11.5A | 380/400/415V | 2136W |
| MHN-SA 2000W/956 | 2kW | 5600K | 90 | 200,000 I.lm | 11.3A | 380/400/415V | 2136W |
| Osram | |||||||
| HQI-TS2000/D/S | 2kW | 5900K | 93 | 200,000 I.lm | 11.5A* | 380/400/415V | 2105W |
| HQI-TS1000/D/S | 1kW | 5900K | 90 | 90,000 I.lm | 9.4A | 380/400/415V | 1040W |
| Technical information may alter dependent on control gear used All dimensions are in mm. |
Home
About Abacus
History and people
Recruitment
News
Facebook
Twitter
Abacus Lighting China
Abacus Lighting Russia
About Abacus
History and people
Recruitment
News
Abacus Lighting China
Abacus Lighting Russia
Applications
Airports
Ports
Amenity and architectural
Car park
Sport
Industrial and commercial
Education and BSF
Road and rail
Wind energy Telecommunications
Airports
Ports
Amenity and architectural
Car park
Sport
Industrial and commercial
Education and BSF
Road and rail
Wind energy Telecommunications
Products
Amenity and architectural lighting
Sports and area floodlights
Car park and road lighting
LED lighting
Columns, base-hinged and fixed
High mast systems
Telescopic masts
Amenity and architectural lighting
Sports and area floodlights
Car park and road lighting
LED lighting
Columns, base-hinged and fixed
High mast systems
Telescopic masts
Services
Design
Installation
Maintenance
Training
Bespoke structures
Fabrication services
Technical
Photometry
Brochure library
Design
Installation
Maintenance
Training
Bespoke structures
Fabrication services
Technical
Photometry
Brochure library
Media
News
Movies
Facebook
Twitter feed
Contact
Head office
Abacus Worldwide
Telephone
+44 (0)1623 511 111
Email
sales@abacuslighting.com
News
Movies
Twitter feed
Contact
Head office
Abacus Worldwide
Telephone
+44 (0)1623 511 111
sales@abacuslighting.com
